|
|
Your Best Bet At Preventing Water Damage In Your Home Is To Stop It Before It Happens. But First, You Must Learn What Causes It. Welcome To Water-Damage.net. This Site Is A Free Information Resource That Will Show You Causes Of Water Damage And What To Do If You Are Affected By It.
As You Explore This Site, You'll Discover...
|
| Hot Topic: What The Visible (And Invisible) Causes Of Water Damage Are |
Insider Secrets: The Dos And Don'ts Of Water Damage Restoration |
Preventing Water Damage In The Basement, Kitchen, And Bathroom |
Helping You Deal With Water Damage Mold: How To Get Rid Of It For Good |
|
Remember... If You Are Looking For Quality Information Related To Water Damage, Add This Site To Your Favorites Right Now, As We Update It Daily With The Latest News And Information Related To Water Damage And Similar Topics. Enjoy The Site.
Everything You Must Know About Water Damage Mold, Water Damage, Water Damage Hardwood Floors, Water Damage Equipment, And Water Damage Repair.
Recommended Water Damage Resources
|
|
| Latest Related Articles
About Water Damage |
|
Hidden Causes of Water Damage in the Home |
|
In addition to causing destruction, water damage also has an adverse affect to the indoor air quality of your home. Damage from water can cause wood rot, insect infestation and mold . The obvious causes of water damage are leaking roofs, windows, doors, foundation cracks and visible plumbing leaks. These are fairly easy to detect, enabling a quick repair before maximum damage occurs. The not-so-obvious culprits are moisture behind finished basement walls that are insulated with fiberglass; poor grading around foundation walls and air leaks that occur between the living space and attic. Insulating finished basement walls with fiberglass is not a good idea. Fiberglass will absorb... |
|
|
Prevent Water Damage in the Laundry Room |
|
The washer and drier are usually located in the laundry room and create heat and moisture. Simple maintenance is required to help avoiding water problems and mold. The Washer The washer is connected to both cold and hot water lines. Check them frequently. Start with the joints and fix a leak if you find it. Be sure to check both ends of the water lines. Clean or replace the filters once in a while. A blocked filter will slow the water flow into the washing machine, and may cause some malfunctions. This problem is worse in areas with "hard water". Inspect the shut off valve by looking for drips into the washing machine while it is not in use. If you detect a leak, replace ... |
|
|
Preventing Water Damage in the Basement |
|
A wet basement can quickly develop into a complete disaster. Many maintenance systems are installed in the basement. These systems generate moisture leading to potential water related problems. A periodic inspection will provide accurate indications for a water problem somewhere else in your home and can help preventing a much bigger damage. Heating and Air Conditioning System HVAC systems must be regularly inspected if located in the basement. Check the drain pans and remove debris to allow it to flow. Do not overlook the filters and replace when needed. When inspecting the HVAC, take a close look at the ductwork. Deteriorating insulations must be treated and sealed. ... |
|
|
| Looking For More Articles Related To Water Damage? |
| |
Hidden Causes of Water Damage in the Home
Author: Ed Bishop
In addition to causing destruction, water damage also has an adverse affect to the indoor air quality of your home.
Damage from water can cause wood rot, insect infestation and mold .
The obvious causes of water damage are leaking roofs, windows, doors, foundation cracks and visible plumbing leaks.
These are fairly easy to detect, enabling a quick repair before maximum damage occurs.
The not-so-obvious culprits are moisture behind finished basement walls that are insulated with fiberglass; poor grading around foundation walls and air leaks that occur between the living space and attic.
Insulating finished basement walls with fiberglass is not a good idea.
Fiberglass will absorb water and not allow it to travel through the wall, preventing a drying effect.
Some people think installing a plastic barrier in the wall is the answer, but this approach only traps moisture.
A better way is to use rigid insulation (also known as blue board).
This insulation is semi-permeable and allows moisture to travel through the wall, allowing it to dry.
Water can also enter the basement if the grade of the land is pitched toward the house.
Grading the soil away from the house and adding rain gutters will guide rainwater away from the house.
Openings from the house to the attic and poor ceiling insulation in houses located in colder climates can lead to ice dams that cause water to back up into the house.
Air leakage from the house to the attic will carry moisture in the form of humidity into the attic that can form water on the underside of the roof leading to rotting and mold.
Typical leakage points between the house and attic are:
* leaky attic hatches
* holes drilled for plumbing pipes and electrical wires that penetrate the attic and are usually not sealed
* Recessed light fixtures that are not the airtight type
* Exhaust fans that vent directly into the attic
For those who live in warmer climates, water damage can occur within your walls because of poorly designed air conditioning systems.
Systems that are oversized (a larger capacity than necessary)will not remove enough humidity which leads to high moisture levels that condense on cooler surfaces.
Duct systems that are imbalanced can draw outside humidity through walls that can produce water in the walls.
Mitigating these problems requires a professional.
Repairing the attic problems listed above may seem simple enough, but trying to do it yourself doesn’t guarantee you really fixed the problem and can sometimes lead to other problems.
Hiring an insulation expert who specializes in building science (also known as a building performance specialist) will ensure the job is done properly and safely.
These specilaists come equipped with tools such as blower doors, pressure guages, etc. to quantify the measures taken for the repairs.
The same goes for the air conditioning specialist, he should have duct diagnostic tools to test your ductwork to be sure it is properly designed and performing efficiently.
If you are unable to find someone in your area, go to www.energyconservatory.com.
They are manufacturers of the required testing instruments and they will have contractors in their database they can recommend.
In addition to taking care of the water damage, your home will be more comfortable, you’ll save money on your energy bills and improve your indoor air quality.
About the Author
Ed Bishop is founder and president of Enhanced Living Inc., a Troy, NY-based design-consulting and contracting company. contracting. Trained in the “House Is A System” approach to HVAC design. He was formerly a building analyst instructor, providing certification training for New York's Home Performance with ENERGY STAR® program
Go to
|
A Quick Note
From The Publisher...
If you like the article above, you may be
interested in the following article which is also related to Water Damage...
|
Building Waterproofing - Keep Your Structure And Investment Safe From Water Damage |
|
The concept of waterproofing or protecting buildings against the damaging action of water derives from the need to avoid water and humidity related elements that act negatively upon constructions. This negative effect can present itself in several ways, creating health problems, structure deterioration, facility damage and others. Not to mention, that repairing a building damaged by water can be very expensive! Permeability most frequent causes are: porous or flawed material, badly sealed splices, crack existence, building defects and inadequate surface pendant. However, we can find different kinds of humidity: the one that gets in from the outside (because of rain, different kind of water infiltrations, ground humidity or underground water), building's own humidity (permanent or because of the construction) and the one produced gradually by the building (because of its service as well as due to condensation and water leaks). Basic conditions for waterproofing involve the surface's fitness for treatment and its cleanness. Building waterproofing can be done in a surface with/without the presence of water and with/without previous treatment. Building Waterproofing Systems Based on water's origin and effects on buildings and concrete, waterproofing systems have been classified: - Surface waterproofing: done with coating plates, bituminous emulsions, vinyl pastes, resins and sealants. - Integral waterproofing: integrated to the mass of concrete, affecting its permeability. - Hydrophanous waterproofing: integrated to the mixing water or used as curing systems, allow the improvement of concrete's characteristics such as workability, compression resistance, decrease of reinforcement steel corrosion, decrease of... |
|
|
|
|
|
|
Water Damage, Water Damage Mold News |
|
|
|
|
